JV-880 ZONE

Roland JV-880 117V 2-Prong To 3-Prong Power Cable DIY

2_PRONG_vs_3_PRONG


Back in the 1980's and 1990's there were no rules in the USA which required synth and sampler manufacturers to use 3‑prong grounded power cables. Naturally, Roland took advantage of this and cut their production costs by only installing 2‑prong power cables. As the business credo says, "Who gives a shit about safety when there's a profit to be made?"

So why is this an important modification? Just ask any synth or sampler owner who has plugged their gear into an ungrounded mixing board. It's a quick way to fry transistors in a synth or sampler audio circuit. Grounding also provides an extra level of safety in the event of a major short circuit

Converting a JV‑880 117V synth from a 2‑prong to a 3‑prong grounded AC power cable is much easier than it sounds. Only two parts are needed:


  • 1) Unplug the synthesizer AC power cable from the power outlet!

  • 2) Unscrew the top case cover and unsolder the 2-prong AC power cable from the Power Supply Board

  • 3) Unscrew the square metal plate holding the power cable in place. Remove cable from the plastic cable retaining clamp

  • 4) Feed the 3-prong power cable through the square black metal plate. Reuse the plastic cable retaining clamp
         then feed the HOT and NEUTRAL wires through the ferrite bead cylinder using two loops as before

  • 5) Solder the 3-prong cable HOT wire to the post on the Power Supply Board labeled HOT
    • Refer to Figure 1 to determine the HOT wire (the HOT wire is usually BLACK or BROWN)

  • 6) Solder the 3-prong cable NEUTRAL wire to the post on the Power Supply Board labeled COLD
    • Refer to Figure 1 to determine the NEUTRAL wire (the NEUTRAL wire is usually WHITE or BLUE)

    7) Connect the 3-prong cable GROUND wire to an existing screw terminal located somewhere on the metal chassis
    •  This is ideally accomplished using a circular crimp connector, lock washer and an existing chassis screw (See Figures 2 & 4)

  • 8) Attach the thick square black metal plate and secure the new 3-prong AC power cable in place

  • 9) Reattach the top case cover before plugging the AC cord into the power outlet and turning on the power
HOT_OR_NEUTRAL_WIRE
(Figure 1)
GROUND_CRIMP_2
(Figure 2)
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |   click on any image to expand view   | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
D-880_PSU_BOARD_BEFORE

(Figure 3)
JV-880_PSU_BOARD_AFTER

(Figure 4)
Safety Precautions
Modifications made to any factory stock equipment will always pose an element of risk. Sometimes mistakes are made which are irreversible. Improper soldering and handling of electricity can cause serious injury and damage the synthesizer. Use caution when handling static sensitive devices and the PCB. Make sure you are properly grounded, working on a static‑free workbench or table and wearing eye protection during any soldering tasks. The author is not responsible for any damage or injury resulting from this DIY info. Use this DIY information at your own risk. And, I can't stress enough, the importance of wearing eye protection while soldering. That stuff flies everywhere sometimes!

All images, text, JavaScript and HTML Code ©1995- by llamamusic.com

JV-880 ZONE

The Information On This Page Is Current As Of

WEBSITE DISCLAIMER
Last updated October 31, 2014

1) You may not copy, reproduce, republish, disassemble, decompile, reverse engineer, post, make available to the public, or otherwise use the content of this website (including all software applications, scripts, web‑pages, design elements, and graphics) for commercial gain in any way
2) By using the llamamusic.com website and its services you agree to be bound by these terms, which shall take effect immediately on your first use of this website. You may not use llamamusic.com services if you do not accept the terms. If you do not agree to be bound by all of the following terms please do not access and use llamamusic.com. llamamusic.com reserves rights to block violators of these terms from using its services or restrict their access in any form at any time
3) You agree that lawful owners of llamamusic.com own all legal right, title, copyrights, design rights, and other intellectual property rights (registered and unregistered) in this website and all content (including all software applications) located on the site
4) llamamusic.com website content and services are provided "AS IS" and on an "AS AVAILABLE" basis. To the extent permitted by law, llamamusic.com excludes all representations and warranties (whether express or implied by law), including the implied warranties of satisfactory quality, fitness for a particular purpose, non‑infringement, compatibility, security, and accuracy. llamamusic.com does not guarantee the accuracy, completeness, or performance of the website or any of the content and services. While we try to ensure that all functionality provided is correct, no responsibility is accepted by or on behalf of llamamusic.com for any errors or inaccurate content on the website
5) llamamusic.com shall not be liable for any of the following losses or damage (whether such damage or losses were foreseen, foreseeable, known, or otherwise): (a) loss of data; (b) loss of revenue or anticipated profits; (c) loss of business; (d) loss of opportunity; (e) loss of goodwill or injury to reputation; (f) losses suffered by third parties; or (g) any indirect, consequential, special or exemplary damages arising from the use of llamamusic.com and its services regardless of the form of action
6) You agree to use this website only for lawful purposes, and in a way that does not infringe the rights of, restrict or inhibit anyone else’s use of llamamusic.com
7) The information provided by llamamusic.com ("we," "us," or "our") on llamamusic.com (the "Site") is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK

EXTERNAL LINKS DISCLAIMER
The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features in banners or other advertising. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD‑PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD‑PARTY PROVIDERS OF PRODUCTS OR SERVICES

AFFILIATES DISCLAIMER
The Site may contain links to affiliate websites. Our affiliates include the following:
• supersynthprojects.com                  • vecoven.com                  • super-jx.com


Validator Image

Barcode / Domain Image






llamamusic.com